If the CPS was too old, it would give the " Error is caused by no acknowledge. For that you need a CPS newer than the firmware's release date. If the firmware is newer than the CPS you have an incompatibility. The radio is composed from hardware and firmware. ![]() ![]() ![]() If not, check the cable and if possible, try another cable.Īlso listen for the Device add sound in Windows - this tells you that the cable is okay and the driver is being loaded. If you can program another radio using the same PC cable and USB port, then the problem is with the radio. There are three possible causes for error 1. ![]() Error unable to detect applicable device s check to see if a compatible programming cable is used.
0 Comments
Leave a Reply. |